Compact and Full-Featured Waterproof Compact Digital Camera Set.
12.2 effective megapixels and 4x optical zoom.
A waterproof camera, so no need to worry if it gets wet!
The DX-GE5 camera is waterproof to depths up to 5m, allowing it to be used in all kinds of general outdoor situations, from marine sports to snow settings. Of course, the housing is built to withstand pressure at water depths up to 55m, enabling it to handle full-range diving as well.
High definition CCD – 1/2.3-inch primary colour CCD with 12.20 effective megapixels and 4x optical zoom lens (38–152 mm).
Equipped with underwater photo and video modes perfect for use underwater.
The camera is waterproof to depths up to 5m. (*Determined based on General Imaging Company testing methods.)
2.7-inch LCD monitor (with an automatic brightness adjustment function). Approx. 230,000-dot LCD monitor that's easy to see when checking photos while shooting or during playback. Automatically adjusts the brightness of the LCD screen to match the amount of ambient light in the area.
Equipped with a recognition function (for faces, smiles, and blinking) and blur reduction function.
Equipped with a High Dynamic Range (HDR) function that corrects for blown out highlights and blocked up shadows in high contrast scenes to give a more natural image.
Compatible with highly sensitive ISO 1600 photography.
Removable macro diffuser function. Adjusts light from the internal flash to make it uniform during macro shooting.
Retractable fibre optic cable socket, can be extended to align with the built-in flash and hold fibre optic cable in correct position.
The back door can be opened and closed while the housing is mounted on an arm stay.
Strong and durable build with a depth rating of 55m.
For digital compact and DSLR cameras.
A small DS-TTL and manual strobe with built-in target light.
Multiple features condensed into a compact design.
Offering a circular beam angle up to 100° and with guide number of 20 the YS-01 is a new compact slave strobe that can be used for all underwater applications, from wide-angle to macro photography. You can switch between DS-TTL (Digital Slave TTL) and the ten-step manual control function to enable fine adjustment of the light output level. You can also set up a lighting system that uses two strobes in DS-TTL mode!
Power comes from four AA batteries for a powerful and long-lasting strobe so you can enjoy taking pictures all day long without having to recharge the batteries. The strobes recycle time is 1.9 seconds when using nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting.
The YS-01 is furnished with a high-luminance white LED target light (1W) which indicates the optical axis of the attached strobe and is effective for night diving.
You can fully exercise your creativity with the YS-01 which can be used as a primary or secondary strobe in a wide range of applications, from compact digital cameras to DSLR cameras.
Exposure Control: DS-TTL, TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
- Pre-flash Control: Equipped with pre-flash cancel mode
- DS-TTL function
- Slave function
- Auto power OFF function
- Sync cord: Fiber-Optic Cable (L-type)
- Over-pressure relief valve
- LED target light
Guide Number (ISO 100/m land): 20
Beam Angle: 100°x 100° (with diffuser 110°x110°)
Batteries: 4xAA (A: 6V Ni-MH: 4.8V)
Number of Flashes: A: 230 Ni-MH: 330
Recycle Time (full): A: 2.5 sec. Ni-MH: 1.9 sec.
Colour Temperature: 5600K
Colour Temperature w/diffuser: 5250K
Depth Rating: 75m (250ft)
Dimensions (WxHxD): 68x108x129mm
Weight: 505g (Underwater Weight: -10g)
Sea-Arm 7 Compact
Fully adjustable arm and tray unit
for mounting Strobes to Digital Compact Camera Housings.
This versatile, fully adjustable ball-arm unit is designed to mount Sea&Sea strobes to most digital compact camera housings.
The strobe head can be positioned as required and held securely in place by the ball-clamps which are designed to allow firm tightening and smooth loosening. Glass fibre reinforced plastic resin construction prevents corrosion and makes the Sea-Arm VII Compact extremely durable.
The optional accessory Sea-Arm VII - Right Arm Set can be added to mount a second strobe or modelling light.
The Sea-Arm VII Compact comprises; Tray unit, housing mounting screw, ball base, double ball arm (M), Sea&Sea strobe mount section, 2x ball-clamps.
Construction: Glass fibre reinforced plastic resin, Corrosion-resistant aluminium alloy, stainless steel, brass, rubber
Dimensions: Arm Length 450mm
Weight: Approx. 575g
Fiber-Optic Cable (L-Type)
Connects YS-series strobes to digital camera housings.
Ensure the strobe triggers every time.
This fiber-optic cable resists bending and has improved light-conducting efficiency.
We cover the 100 % price if the item will be lost or damaged. You don't need to worry "what If". We provide only the best service to our clients. All packaged insured and shipped in protective boxes if needed.
Please note: if the item will be lost we will await official confirmation from EMS, DPD, Post Office, DHL, UPS that your item is really lost, we will pay back you full item price in next 3 working days.
When you are receiving items, please check if everything is inside, and that item is not damaged. If it's damaged or something missing, please take blank from courier and fill it. After that we will receive this official confirmation and will pay you back money for your item in next 5 working days. Or we will ship another item to you.
Write Your Own Review
Only registered users can write reviews. Please, log in or register