STC Italica Dynamic and self lubricant slider-ring 6,5mm traditional shaft
Next
![STC Italica Dynamic and self lubricant slider-ring 6,5mm traditional shaft XSHOT65 €6.29](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 125 145" width="125" height="145"></svg>)
Shock Absorber 13 mm inner barrel's guns
Previous
Shock Absorber 13 mm inner barrel's guns
Previous
STC Italia PTFE Lubricant
€8.00
In stock
SKU
XLUBE30
The results obtained with X-Lube, allow to lengthen the lubrication duration of your oleopneumatic at least three times, up to ten times more than that obtained with traditional lubricants. Thanks to the special compounds and the micronization of PTFE, the quantity of product needed to cover a surface to be lubricated is about 8/10 times lower than a traditional lubricant. The particular chemical formulation of the product allows the lubricant to "connect" with the aluminum of the barrel, offering an unprecedented piston ejection speed.
Very few ml of product guarantee durability over time, outstanding performance and an internal cleaning of the highest order. Furthermore, PTFE is a plastic material and as such allows a significant reduction in noise due to the movement of the lubricated parts. The ability to work under very high load conditions ensures great durability without loss of performance even in the long run.
Pack of 30 ml.
Adjustable spray dispenser
X-Lube is able to guarantee a dry film that prevents dust, residues and atmospheric agents from adhering to the lubricating surface. It is able to protect from humidity, steam, water, overcoming salt fog tests. Thanks to the special formulation it avoids dripping and the old unpleasant problems due to the product replacement phase.
Elimination of dust and residues water-repellent
In the X-Lube lubricant, the micronization of PTFE and the capillarity of the carrier oils can penetrate even in critical points and difficult to lubricate. The PTFE particles subjected to workload deforms but do not allow the lubricating film to break while maintaining optimum lubrication. The result is a level of lubrication absolutely unprecedented in the field of oleo-pneumatic weapons.
Drastic elimination of friction - Very high sliding speed
The low friction coefficient allows to reduce the wear of the lubricated surfaces and therefore guarantee a longer life of the lubrication itself. PTFE is the plastic material having the lowest coefficient of friction resistance known to man, equal to 0.01 and equivalent to the friction developed by rubbing wet ice on wet ice. The lubricating film obtained with X-Lube is resistant to most acids, solvents and corrosive agents.
Very few ml of product guarantee durability over time, outstanding performance and an internal cleaning of the highest order. Furthermore, PTFE is a plastic material and as such allows a significant reduction in noise due to the movement of the lubricated parts. The ability to work under very high load conditions ensures great durability without loss of performance even in the long run.
Pack of 30 ml.
Adjustable spray dispenser
X-Lube is able to guarantee a dry film that prevents dust, residues and atmospheric agents from adhering to the lubricating surface. It is able to protect from humidity, steam, water, overcoming salt fog tests. Thanks to the special formulation it avoids dripping and the old unpleasant problems due to the product replacement phase.
Elimination of dust and residues water-repellent
In the X-Lube lubricant, the micronization of PTFE and the capillarity of the carrier oils can penetrate even in critical points and difficult to lubricate. The PTFE particles subjected to workload deforms but do not allow the lubricating film to break while maintaining optimum lubrication. The result is a level of lubrication absolutely unprecedented in the field of oleo-pneumatic weapons.
Drastic elimination of friction - Very high sliding speed
The low friction coefficient allows to reduce the wear of the lubricated surfaces and therefore guarantee a longer life of the lubrication itself. PTFE is the plastic material having the lowest coefficient of friction resistance known to man, equal to 0.01 and equivalent to the friction developed by rubbing wet ice on wet ice. The lubricating film obtained with X-Lube is resistant to most acids, solvents and corrosive agents.
